How to Vinyl Wrap a Car: Step-by-Step Guide from Auto Style PPF
At Auto Style PPF in Naperville, IL, we specialize in car vinyl wraps that transform and protect your vehicle. Today, we’re sharing how we wrapped a 1991 Mercedes-Benz in Gloss Black 3M vinyl to restore its faded and cracked paint.
Step 1: Wash and Clay Bar Treatment
We start by thoroughly washing the car and using a clay bar to remove embedded dirt, ensuring a perfectly clean surface.
Step 2: Sanding Imperfections
The old paint had cracks and damage, so we sanded those areas smooth. Some parts, like the door handles, needed repainting and were sent to the paint shop.
Step 3: Removing Parts
To wrap edges perfectly, we removed mirrors, door handles, antenna, headlights, taillights, window trim, and door moldings.
Step 4: Deep Cleaning with IPA
We cleaned all rubber seals and edges with 70% Isopropyl Alcohol to remove oils and residues for better vinyl adhesion.
Step 5: Masking Off Areas
Masking tape is applied to protect areas that should not be wrapped.
Step 6: Cutting and Applying Vinyl
We cut vinyl pieces tailored to each panel to minimize waste and carefully apply them.
Step 7: Heat Gun and Bubble Removal
A heat gun warms the vinyl for flexibility. We smooth out air bubbles and tack down edges with 3M primer glue.
Step 8: Reassembly and Final Check
After wrapping, we reinstall removed parts and place the car under sunlight to settle the vinyl and check for any bubbles or peeling.
The Result:
A stunning, flawless Gloss Black finish that revives this classic Mercedes.
Ready to transform your vehicle?
Contact Auto Style PPF in Naperville, IL at 630-524-7477. We require a 50% deposit upfront and the remainder upon completion.
Comments
Post a Comment